Select Page

The high-end economy lines GSN & GFE combine powerful with economic efficiency: both lines are also equipped with helical ground gears, ensuring the very least noise level and smooth running. The entire needle bearing offers been especially made to reach high torques that defeat the competition for devices of the same size. All planetary carriers are produced as a cage made from solid materials. This increases silent operating characteristics while at exactly the same time improving positioning accuracy and reducing backlash. An additional shaft sealing ring ensures maximum dust and splash water safety relative to protection class IP65 in every lines.
One method to reduce backlash is by using precision gears. The concentrate on manufacturing in precision gears is usually tighter tolerances, so all over the gear is a tighter, more specific match. And the tighter fit means much less play in the apparatus teeth, which may be the trigger of backlash in the first place. Of course, precision gears are more costly, if the application calls for high accuracy, then precision gearing may be the way to go.
From a equipment design perspective, an easy way to reduce backlash is to make sure one’s teeth mesh tightly together. This is typically done by shortening the center distance between gears. As for pre-loading, this is often done using a spring mechanism to carry the gears firmly in place. This also eliminates the enjoy between your gear teeth and therefore eliminates backlash.
Of course, the type of gears used may also have a huge impact on the amount of backlash. So for example, some equipment types such as stress wave gears, or harmonic equipment drives, have zero backlash.

The GSD, GSB & GSBL high-end gearbox lines are constructed in a space-optimized, two-stage design. Because of the lower torque values, the input stage is definitely dimensionally smaller than the output stage. Its short style makes the GSD range the perfect high-end gearbox for space restricted applications. The low regular backlash of the GSD range makes it the perfect fit for highly powerful applications where highest positioning and speed accuracy is required. The flange output produces highest torsional rigidity. For the accommodation of especially high axial loads, taper roller bearings are optionally available in sizes with 90 mm diameter or higher. The GSB line stands for high performance in combination with low backlash and high precision. Its robust, one-piece housing allows for a higher gearbox rigidity and the absorption of high radial and axial loads. The angular gearboxes of the GSBL line provide same advantages as the GSB series; the right angle shape makes the GSBL line the perfect match for all powerful applications where space is bound.

Want daily news letters about zero backlash planetary gearbox? Please visit the site.