Select Page

A vacuum pump is a gadget that removes gas molecules from a sealed quantity in order to keep behind a partial vacuum. The 1st vacuum pump was created in 1650 by Otto von Guericke, and was preceded by the suction pump, which dates to antiquity.

Vacuum Pumps, pressure pumps, cover an array of operating pressures. Laboratory/filtration vacuum pumps are for use in the lab or anywhere a minimal vacuum is needed; typically give both vacuum and pressure capabilities. Use rough vacuum pumps (or roughing pumps) for laboratory and industrial applications requiring a level of vacuum less than 10-3 Torr. Use high vacuum pressure pumps if you want vacuums higher than 10-3 Torr. Also, consider the free-air capacity needed (the higher the free air capacity, the faster it’ll evacuate the chamber) and whether you will need a lubricated (oiled) or non-lubricated (dry or oilless) pump. Lubricated pumps provide higher capacities, higher vacuum amounts, and lower noise, but can contaminate the machine and require more maintenance.

Industrial Vacuum Pumps
Vacuum Pumps
Our selection of commercial vacuum pumps includes oil-less and oil-flooded choices. We can customize a pump to suit your specific needs and offer you with guidance when it comes to deciding on the best pump for you. You can expect high-quality, long-lasting outcomes when you choose Becker vacuum pumps.

100% Oil-less Vacuum Pumps
The Ever-power KVT3.60 – 3.140 series pumps are 100% oil-much less rotary vane vacuum pumps designed to operate on a continuous basis at any point from atmospheric pressure to a vacuum degree of 27” HgV (75 torr). These direct travel units are supplied with a higher efficiency TEFC, C-encounter, flange mounted electric electric motor. Each one of these pumps has an integral vacuum relief valve, a 5μ inlet filtration system, and vibration isolators as standard equipment.