Select Page

Wide variety of servo gearboxes, made to fit virtually all servo motors on the market
Designed for the best torsional stiffness and the cheapest angular backlash, intended for the maximum torque and overhung loads
Bush with slot machine games and hub clamp for servomotor coupling
Enhanced dimensional compactness because of direct servomotor coupling
Widest range of possible servomotors coupling dimensions.
The right technical solution thanks to a comprehensive selection of sizes, gear stages, transmission ratios, designs and non-standard designs.
Servo equipment reducers (worm, coaxial, helical and bevel helical units) Catalog SR
Operating instructions:
Operating instructions for equipment reducers and gearmotors (UTD.045)
EP Drive Systems, Inc. is very happy to announce the growth of our selection of Servo Reducers, today offering five levels of precision to meet up any app requirements. The five levels of precision available allows a machine designer to select the mandatory reducer precision to meet up their needs and their budget. They are available in both in-range and right-angle variations, in torques up to 7,376 lb.ft. and ratios to 3,392:1.
Typical applications for these reducers include rotary & linear axis drives, and material handling axis drives. Industries offered include Material Managing, Automation, Aerospace, Machine Tool and Robotics.
The mounting faces of the HT, HP, E and B versions are identical, making it possible to interchange a unit with an increased or lower accuracy unit if needed.
A wide range of electric motor couplings and installation flanges are for sale to the entire reducer range to attach virtually any servo electric motor and the hollow bore output can be utilized to mount output shafts, pinion shafts, or other drive components.
These reducers are usually selected predicated on the peak cycle forces, which often happen during accelerations and decelerations. These routine forces rely on the driven load, the swiftness vs. time profile for the cycle, and any other exterior forces functioning on the axis. For more selection information, please follow this PDF hyperlink.
For application & selection assistance, please call, fax or email us. The application details will be reviewed by our engineers, who’ll recommend the very best solution for the application.
EP Inc. provides a full range of modular servo gearboxes /worm reducers. The modular design permits configurations with motor input flange and output pinion for rack and pinion drives, as well as solid result shafts, Hollow bore result, and input shafts for all the positioning applications. The modular style allows for universal installation of the gearbox in any orientation.
They can be utilized on motors with a NEMA23 standard flange through an adaptor kit. As the gears are naturally angled, they result in a short total length of the engine and its gear.
The series may also be delivered both right- and left-angled and with output shafts on both sides. A 30-mm machine recess for centering and a 4 M5 threaded mounting hole may also be built on the gear’s output side.
Built with a simple and robust style, the series provides gearing ratios that range between 6:1 to 75:1. The user may also customize the materials through the order, so as to match the apparatus to its intended app.
The Precision Planetary Gears of the EPRG series contains a thorough range of low backlash planetary gearboxes, with up to class 3′ precision, available in several gear frame sizes, with single or multiple stage reduction (for gear ratios from 1:3 to 1 1:1,000). These models also include versions with double shaft, right position shaft and right position output, in addition to a full range of adapters for electric motor mounting, making them with the capacity of meeting the requirements of even the most diverse applications. They are made for use with integrated servo and stepper EP motors, mounted straight or via adaptor flanges, but can also be used with other EP electric motor types. This range of products is based on years of experience and represents the end result of a decade-long study aimed at improving performance.
Maximum precision and dynamics, coupled with extraordinary torque density, are the key requirements specific for reliable servo gearboxes used. EP offers servo gearboxes for just about any application and any functionality range. Our low-backlash planetary and right-position gearboxes reflect our enthusiasm for innovation and the highest levels of precision.
Worm gear reducers provide market enhance solution with efficiency and flexibility. Low amount of basic models can be applied to an array of power ratings guaranteeing best performance and decrease ratios from 5 to 1000.
Gear reducers and servo gearboxes of EP Precision Machinery Co., Ltd. are made for high-performance mechanical apparatus. When the motor velocity must be reduced, the result torque improves and send torque completely to the application form. We believe that clients will appreciate our equipment reducer to achieve their demand. Just check out EP, you can obtain more information regarding servo gearheads, servo gearboxes, and equipment reducers. We always keep going forward for your support.
Plug the Rate Reducer into the desired channel of your receiver, and plug the lead from your servo (or servo wye) into the man servo lead coming from the circuit board. The set screw on the blue trim pot, located near the top of the main circuit board, is used to control the swiftness of the servo. Turn the set screw completely clockwise (CW) for regular servo speed with no speed reduction, fully counter-clockwise (CCW) for optimum speed reduction, or anywhere in between for partial rate reduction. The reddish colored LED indicates three feasible conditions: Slow Blinking = No Signal; Solid On = No Velocity Decrease; Fast Blinking = Reduced Rate Setting
Please note that if you make any alter to the speed environment while the receiver is on, you must cycle power to the receiver (turn if off and back again on) for the new speed environment to take effect. This circuit may also be utilized in conjunction with our Servo Reverser to cause flap or retract servos to carefully turn in opposing directions for appropriate function. Guidelines are included for easy installation and use.
IMPORTANT NOTE: This product will only focus on a normal, proportional servo. You won’t work on a retract-type servo, as they do not acknowledge any servo positions apart from clockwise (CW) and counter-clockwise (CCW). Retract servos cannot be slowed down, also by a transmitter which includes this function, as their design and electronics don’t allow it. Examine the FAQ page to learn more.
This device will certainly reduce the speed of any regular, proportional servo. Connect it between your receiver and the servo (or servos) you intend to control for a more scale-like movement of flaps or retracts. Adjustable, it could be set to reduce the rate of your servo from super-slow motion to no speed decrease at all, with an nearly infinite amount of positions among. Maximum reduction time for a servo to travel 90 degrees is about 14 seconds, minimum period (no reduction) is merely the normal acceleration of the servo. Great for reducing or removing the inclination of a plane to “balloon up” when flaps are deployed. It can be utilized to control several servo by utilization of a normal servo Y.
This is the new regulated version that can be used on radio systems powered by any size or kind of battery, including 4.8-6.0 volt 4-5 cell Ni-Cad/Ni-MH electric batteries, and HV (high voltage) receivers that operate on 2-cell 6.6-8.4 volt Li-Po/Li-Ion/Lifestyle batteries. This unit will NOT reduce the voltage likely to your servos.
The EP Gear Reducer is the perfect solution for servomotor applications such as for example packaging machines, gantries, injection molding devices, pick and place, and linear slides.Provided in concentric shaft, correct position solid shaft, and correct angle hollow shaft designs with modular adaptor flanges and keyless compressible bushings to quickly mount to any kind of manufacturer’s servo motor. The EP Series helical gears have slanted teeth compared to spur gears with directly cut teeth, making a smoother gear mesh, yielding significantly lower noise levels.
The low backlash EP planetary servo gear units are made for the 30 to 350 Nm (265 to 3100 lb-in) torque classes. These were designed to combine the greatest possible flexibility and cost-efficiency because don’t assume all application requires high-performance elements.
They provide a basis for diverse, dynamic and cost-optimized drive solutions.
The EP planetary servo gear units are available in the following versions:
PSC = B5 output, even output shaft
PSKC = B5 result, with keyway
PSCZ = B14, result, smooth output shaft
PSKCZ = B14 result, with keyway

You have actually certainly transformed to the web to read more regarding servo gear reducer since public libraries don’t lug as much details regarding this subject as they utilized to.